GYROID smooth double-tier pendant light, ivory white, hero

GYROID rounded pendant light in a room, lit

GYROID pendant light with perforated top diffuser disc

GYROID pendant light glowing, seen from below

GYROID pendant light over a dining table

GYROID pendant light over a kitchen island

See it in a room

See it in your room in 3D

Drag to turn it. On a phone, tap View in your space to stand it in the room at full size.

Modern Boho Pendant Light — GYROID

4.92 204 verified Etsy reviews

$80.96 ~~$89.95~~ 10% off complete · ready to hang

Size

Cord Kit

A plug-in kit works in any outlet — no wiring, no electrician.

Edition

Color50+ colors each

Outer Shade Color Bone White 57 colors

Popular

Lights & Neutrals

Warm & Vibrant

Blues & Greens

Darks & Clear

All 57 colors · printed to order

Inner Diffuser Color Bone White 57 colors

Popular

Lights & Neutrals

Warm & Vibrant

Blues & Greens

Darks & Clear

All 57 colors · printed to order

Socket Cover Color Charcoal Black 57 colors

Popular

Lights & Neutrals

Warm & Vibrant

Blues & Greens

Darks & Clear

All 57 colors · printed to order

Free U.S. shipping
30-day free returns
Made to order in 1–2 days

A pendant light in the wrong size is the fastest way to make a good room feel off — too small and it disappears, too large and it crowds everything under it. This pendant light size guide gives you the actual numbers: how wide a shade to choose and how high to hang it over a kitchen island, a dining table, and an entryway, in both inches and centimeters. No guesswork, no design jargon.

The two measurements that decide everything

Every choice comes down to two numbers: the diameter of the shade and the hanging height — the gap from the bottom of the shade to the surface below it. Diameter controls how the fixture reads in the room. Hanging height controls whether people can see across the table, sit without ducking, and walk under it safely. Our 3D-printed shades, like the ECLIPSE, run from 7 inches (18 cm) to 12.5 inches (32 cm) across, which covers most single- and multi-pendant setups.

MARISA organic sculptural pendant light glowing warmly as a boho statement piece

How to size a pendant light for a kitchen island

Over an island, use a row of two or three evenly spaced pendants rather than one. The combined width of the shades should equal about one-half to two-thirds of the island's length. Leave 6 to 12 inches (15–30 cm) of clear space at each end, and space the pendants 24 to 30 inches (61–76 cm) apart, measured center to center.

Island length	Number of pendants	Diameter each
4 ft (122 cm)	2	7–9 in (18–23 cm)
5 ft (152 cm)	2	8–10 in (20–25 cm)
6 ft (183 cm)	2–3	9–12 in (23–30 cm)
7–8 ft (213–244 cm)	3	9–12 in (23–30 cm)

Hang the bottom of each shade 30 to 36 inches (76–91 cm) above the countertop. That keeps the bulb out of sightlines while pooling light on the work surface.

Sizing pendants over a dining table

The goal at a dining table is to light a span roughly one-half to two-thirds of the table's length. A single wide shade suits a small round or square table; a row of two or three shades suits anything longer than about 48 inches (122 cm). Because our shades top out at 12.5 inches (32 cm), longer tables look best with a cluster or a straight row rather than one oversized fixture.

Table length	Recommended setup
Round, up to 42 in (107 cm)	1 shade, 9–12.5 in (23–32 cm)
48–60 in (122–152 cm)	2 shades, 8–10 in (20–25 cm) each
66–84 in (168–213 cm)	3 shades, 9–12 in (23–30 cm) each

Hang the bottom of the shade 28 to 34 inches (71–86 cm) above the tabletop with a standard 8-foot ceiling. For every additional foot of ceiling height, raise the fixture about 3 inches (8 cm).

Entryway and foyer pendants

For an entry, there is a simple starting formula: add the room's length and width in feet, and use that sum as the shade diameter in inches.

Room size	Length + width	Target diameter
8 × 10 ft	18	~18 in (46 cm)
10 × 12 ft	22	~22 in (56 cm)
12 × 14 ft	26	~26 in (66 cm)

Since a single printed shade maxes out near 12.5 inches, hit larger targets with a tight cluster of two or three shades. In a standard-height entry, keep the bottom of the fixture at least 7 feet (213 cm) above the floor. In a two-story foyer, center the pendant in the window if there is one, and never let it hang below the second-floor landing. If it hangs over a console table, treat it like a dining pendant and center it on the tabletop.

Hanging height rules in one place

Location	Bottom of shade above surface
Kitchen island or counter	30–36 in (76–91 cm) above the counter
Dining table (8 ft ceiling)	28–34 in (71–86 cm) above the table
Walkways and open floor	at least 84 in (213 cm) above the floor

The one adjustment to remember: add about 3 inches of drop for every foot your ceiling rises above 8 feet, so the fixture stays in proportion with the taller room.

3D printed crown geometric pendant light shade, boho statement

A 10-second shortcut

When you just need a starting point for a single ambient pendant in any room, add the room's length and width in feet and read the total as inches of diameter. A 10-by-13-foot room lands around 23 inches — which, in our line, means a cluster of two or three shades rather than one. From there, adjust down if the fixture will hang over furniture and up if the ceiling is high.

Match the size to the room

Once you have your numbers, the fun part is choosing a shape. Browse the full range of shades and cord kits in our Pendant & Ceiling Lights collection, or add a smaller accent with a piece from our Table & Desk Lamps collection. Every shade is made to order in our Connecticut studio in more than 50 colors.

If your island, table, or ceiling is an unusual size, we can print a shade to your exact dimensions — that is the advantage of a one-person studio. See how it works on our Custom 3D Printing page, send us your measurements, and we will size the shade to fit the room instead of asking the room to fit the shade.

LUMA by DrMaker3D

Want this, but not quite this?

Shape it, texture it, size it in live 3D. The engine checks it is buildable and prices it on the spot.

Open the designer

The details

About this light

The GYROID stacks two soft, rounded tiers into a plump, sculptural silhouette — a smooth matte shade that pours a warm, even glow from its open base while a perforated crown adds a gentle dappled halo. A soft-modern boho centerpiece, precision 3D printed.

Choose your size

Offered in 5 sizes — from a compact accent shade to a bold statement centerpiece. Check the size guide here to match your ceiling height and the space below.

Choose your edition

Standard — cleanly printed and great-looking, at the friendliest price.
Premium — printed slower in much finer layers for a smoother shade and crisper light and shadow. Choose it for gifts or your finest finish.

More than 50 colors

Pick from 50+ finishes — curated neutrals to modern vibrants (see the color chart here). Custom colors available on request.

DrMaker3D color options — 50+ custom colors, printed to order

Good to know

Choose Shade Only, or add a Hardwired or Plug-In kit at checkout for a ready-to-hang setup.
The Shade Only option is the printed shade — pair it with your own standard cord set or lampholder.
Use with an LED bulb only, to safely manage heat.
Wipe clean with a soft, dry cloth.

GYROID setup options: shade only, hardwired, plug-in

Made just for you

Each shade is 3D printed to order and inspected by DrMaker3D before it ships — a small Connecticut studio, not a factory.

In their words

What people say

4.92 204 reviews

5 46
4 2
3 1
2 1
1 0

Verified

Just as pictured. Solid construction. Very happy with it.

Ted · Feb 2026

Verified

It was exactly what I wanted, size , color, quality. Very accurate description, extremely happy with my purchase

julieclink1 · Jun 2025

Verified

Arrived on time, was in great quality, and will make an excellent gift for my bouldering boyfriend!

Tory · Jul 2026

Verified

Good communication regarding timeframe. High-quality product. Perfect for my project.

Annie · Aug 2025

Verified

Very cute, strong enough magnets to hold up photos and made a great gift.

Isobel · Dec 2025

Verified

Good communication from shop owner. High-quality materials. Perfect for my project.

Annie · Aug 2025

Reviews collected from our Etsy shop, where DrMaker3D has been selling since 2025. Every one is from a verified purchase.